Plating Controllers

Controller for electroless nickel baths / Controller for electroless copper baths

Click to enlarge

Controller for electroless nickel baths

Nickel controller WNI600 with flow sensor Nickel controller WNI600 with flow sensor

Nickel controllers are used to optimize and monitor your plating process. The associated nickel sensor is precisely designed for the green light wave range of a nickel bath. It measures the light absorption of the nickel in relation to a certain reference. Its measuring range is from 0.1 to 25 g/l.

 

6 relay outputs are available for controlling dosing pumps and actuators.

 

The integrated data logging documents the complete success of your bath treatment.

Product features:

Reading the concentration

The output is selectable between grams per liter (g/l) or ounces per gallon (oz/gal). Curves of all measured values can be displayed on the screen; the controllers are web-enabled and enable remote maintenance.

Adjustable by operator

Concentration set point, alarm thresholds (maximum and minimum), dead band and pump running time are adjustable. External switching contacts (e.g. flow monitors or level switches) can be used to block individual control outputs (locking function).

Integrated datalogging

Load the stored data onto a USB stick and use it to check the system behavior. The data and event logs show nickel values, accumulated chemical supply, and relay trip times.

Optional pH Measurement

The WNI600 can also be equipped with pH measurement / control and can be retrofitted at any time.

Online demo

Here we provide you with a test access. For data protection reasons, this can only be done by e-mail: At walchem@mpt-rodgau.de you will receive a hyperlink with login data quickly and without obligation.

 

We will under no circumstances use your e-mail address to contact you, unless it is expressly requested by you, or in the event of a malfunction.

Controller for electroless copper baths

Copper controller WCU600 with immersion sensors or flow sensors Copper controller WCU600 with immersion sensors or flow sensors

The copper controller WCU600 has the same functions as the WNI600. To measure the copper content, it is equipped with a different sensor, which in turn is designed for the light wave range of copper.

Product features:

Reading the concentration

The output is selectable between grams per liter (g/l) or ounces per gallon (oz/gal). Curves of all measured values can be displayed on the screen; the controllers are web-enabled and enable remote maintenance.

Adjustable by operator

Concentration set point, alarm thresholds (maximum and minimum), dead band and pump running time are adjustable. External switching contacts (e.g. flow monitors or level switches) can be used to block individual control outputs (locking function).

Integrated datalogging

Load the stored data onto a USB stick and use it to check the system behavior. The data and event logs show copper values, cumulative chemical supply, and relay-triggering times.

Optional pH input card measurement

The WCU600 can also be equipped with pH measurement / control and can be retrofitted at any time.

Online demo

Here we provide you with a test access. For data protection reasons, this can only be done by e-mail: At walchem@mpt-rodgau.de you will receive a hyperlink with login data quickly and without obligation.

 

We will under no circumstances use your e-mail address to contact you, unless it is expressly requested by you, or in the event of a malfunction.

Plating controllers for electroless nickel baths electroless copper baths

Druckversion Druckversion | Sitemap Diese Seite weiterempfehlen Diese Seite weiterempfehlen
© 2018 - MPT Meß- und Prozeßtechnik GmbH