pH/ORP Transformers

pH / ORP controller WPH600

The Walchem WPH600 offers state-of-the-art technology for automating your water treatment. In addition to the main parameter, pH/ORP, the controller supports a multitude of other sensors.
Several water circulations can be treated at the same time. Select between mechanical relays or optical-coupler outputs to proportionally control dosing pumps with contact input. An integrated logging function makes for a complete documentation of the water treatment.

The WPH600 features two universal sensor inputs or up to four 4-20 mA inputs for:

• pH/ORP sensors
• Conductive conductivity-measuring cells with different cell constants
• Inductive conductivity electrodes
• Free chlorine / bromine
• Total chlorine
• Chlorine dioxide
• Ozone
• Hydrogen peroxide
• Peracetic acid
• Any other sensors with output signals ranging from -2000 to +1500 mV
• Fluorescence sensors (for PTSA or fluorescein)

Six digital inputs can be used for different purposes:

• Flow switches or other external contacts for disabling the control
• Water flow meters for dosing chemicals in proportion to quantity

Six relay outputs can be preset to different control modes:

• On/Off set-point
• Dosage based on a water flow meter
• Dosage with switchover between two set-points
• Timer-based activation
• Time-proportional control
• Probe wash
• In-range or out-of-range activation
• Common alarm

Via two optional, insulated analog (4-20 mA) outputs, measured values can be transmitted toward a PLC or any other device. Alternatively, the fluid quantities of dosing pumps can be controlled.

A USB interface is intended to read out the memory, to import/export configuration files and to update the controller software.

An Ethernet board enables remote access via the Internet or LAN.

Name: guest, Password: 2001

pH / ORP controller WPH100W (wall mount)

The Walchem WPH100W provides an economical entry and a very flexible way to keep your water treatment program under control.

It features a sensor input compatible with amplified-pH/ORP sensors. Two additional models support non-amplified pH/ORP electrodes with or without a BNC connector.

Two digital inputs can be used for different purposes:

• Flow switches or other external contacts for disabling the control
• Water flow meters for dosing chemicals in proportion to quantity

Three relay outputs can be preset to different control modes:

• On/Off set-point
• Dosage in proportion to quantity based on a water flow meter
• Timer-based activation
• Time-proportional control
• Probe wash
• In-range or out-of-range activation
• Common alarm

Via an optional, insulated analog (4-20 mA) output, measured values can be transmitted toward a data logger, a PLC or any other device. Alternatively, the fluid quantity of a dosing pump can be controlled.

A USB interface is intended to update the controller software and to read out diagnostic protocols.

pH / ORP controller WPH100P (panel mount)

The Walchem WPH100P provides an economical entry and a very flexible way to keep your water treatment program under control.

It features a sensor input compatible with amplified-pH/ORP sensors. Two additional models support non-amplified pH/ORP electrodes with or without a BNC connector.

One digital input can be used for different purposes:

• Flow switches or other external contacts for disabling the control
• Water flow meters for dosing chemicals in proportion to quantity

Four relay outputs can be preset to different control modes:

• On/Off set-point
• Dosage in proportion to quantity based on a water flow meter
• Timer-based activation
• Time-proportional control
• Probe wash
• In-range or out-of-range activation
• Common alarm

Via an optional, insulated analog (4-20 mA) output, measured values can be transmitted toward a data logger, a PLC or any other device. Alternatively, the fluid quantity of a dosing pump can be controlled.

A Micro-USB interface is intended to update the controller software and to read out diagnostic protocols.